Digital Motorized Hardness Tester

$10,995.00

900-356 Large Frame Digital 

Motorized BRINELL Hardness Tester

SKU: 900-356 Category:

Description

900-356 Large Frame Digital Motorized BRINELL Hardness Tester

• Load Cell driven system provides precise control of test force application• Direct digital reading• Engineered to obtain highly sensitive and accurate readings• Perfect for laboratories, workshops, tool rooms, inspection labs, etc.• Measuring Range: 3.18-650HBWSpecifications: • Innovative closed-loop technology. The tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations.• The gross weight of the tester is 50% less than the traditional dead weights type testers.• Test load selection by keypad and shown on the LCD screen.• Fully automatic test cycles. The Brinell hardness Tester features a fully automatic test cycle, load application, dwell, unloading, is performed fully automatically. This greatly improves reproducibility of test results since operator influence is eliminated.• Selectable dwell times by screen. The indenter, load, and other test information are shown clearly on the large LCD screen.• The directions for 0.102F/D2 ratios selecting according to the materials and hardness range can be showing on the screen.• Equipped with a 20X optical microscope to measure the diameter of Brinell indention.• Brinell Hardness Calculator (BHC) makes the hardness value calculation easy and convenient.

 

Technical data:Loads: 3000kgf (29400N), 1500Kgf (14700N), 1000Kgf (9800N), 750Kgf(7355N),500Kgf (4900N), 250Kgf (2452N), 187.5Kgf (1839N), 125Kgf (1226N),100Kgf (980N), 62.5Kgf(612.9N)Load dwell duration: 2s~99s, can be set and storedTungsten Carbide Ball indenter: 10mm, 5mm, 2.5mmMeasuring range: 3.18HBW~ 658HBWMagnification of the microscope: 20XResolution capability of the microscope: 0.005mmMax measurable height: 430 mm (w/large anvil) 450mm (w/small anvil)Max measurable depth: 200 mmDimensions: 600mm×300mm×1000mmPower supply: 220/110 V, 50/60 Hz, 4AWeight: 205kg (gross) 165kg(net)

Additional information

Weight 176 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.