Kent USA KLS-2660N Engine CNC Lathe

$49,950.00

Description

Kent USA KLS-2660N Engine CNC Lathe

• 10 HP AC Servo Spindle motor
• Big 4” plus spindle through hole
• Rigid FC30 castings with extra ribbing
• Induction hardened and ground ways
• Alloy steel gears that are hardened and ground;
• Extra large precision ground ballscrews
• 27-135, 55-270, 160-805, 325-1630 RPM in four ranges
• Auto Lube system with metered Check valves
• Full enclosure
• Fanuc 0iMate CNC control

GENERAL SPECIFICATIONS

 

Swing Over Bed: 26”
Swing Over Cross slide: 9.05”
Distance Between Centers: 59”
Width of Bed: 15.9”
Spindle Nose: D1-8 (Opt. ASA A1-8)
Spindle Bore: 4”
Spindle Taper: 1:20 taper; MT #7 with reducing sleeve
Spindle Speeds: (4 Ranges) 27-135, 55-270, 160-805, 325-1630 RPM
Longitudinal Travel (Z-Axis): 57.8”
Cross Slide Travel (X-Axis): 14.4”
Z-Axis Ballscrew Diameter: 1.575”, 10 mm pitch
X-Axis Ballscrew Diameter: 1”, 5 mm pitch
Z-Axis Rapid Traverse Speed: 400”/min
X-Axis Rapid Traverse Speed: 320″/min
Tailstock Quill Diameter: Ø 3”
Tailstock Quill Travel: 6”
Tailstock Taper: MT #5
Spindle Motor: 10 HP
AC Servo Motor (Z-Axis): 1.86 HP
AC Servo Motor (X-Axis): 1.6 HP
Net Weight: 8,140 LBS
Gross Weight: 8,790 LBS
Packing Dimension: 118” x 70.5” x 87.8”

STANDARD ACCESSORIES

  • 12” 3 Jaw chuck
  • Automatic 4 position electric turret
  • Tailstock
  • Programmable flood coolant
  • Work light

POWER REQUIREMENTS: 220 volts, 60 Hz, 3-phase, 25 Amp.

OPTIONS AND ACCESSORIES

3 jaw scroll chuck $ 1,650.00
4 jaw independent chuck $ 950.00
Hydraulic chuck 8” (A1-6 Spindle) $ 5,500.00
Hydraulic chuck 10” $ 6,250.00
Hydraulic tailstock $ 2,950.00
Upgrade to 6 position turret $ 2,500.00
Follow rest $ 350.00
Face plate $ 650.00
Quick change toolpost (instead of standard 4 way toolpost) $ 1,500.00
Royal Live center (M.T. #5) $ 975.00
Rustlick coolant (1 gallon, mixes 1:30) $ 50.00

 

Reviews

There are no reviews yet.

Be the first to review “Kent USA KLS-2660N Engine CNC Lathe”

Your email address will not be published. Required fields are marked *