Kent USA RML-1660T Precision Lathe 60″ x 16″ 5Hp Spindle Hole 2-1/16” (52.5 mm)

$15,950.00

Kent USA RML-1660T Precision Lathe 60″ x 16″ 5Hp Spindle Hole 2-1/16” (52.5 mm)

SKU: RML1660 Categories: , ,

Description

Kent USA RML-1660T Precision Lathe 60″ x 16″ 5Hp Spindle Hole 2-1/16” (52.5 mm)

 

  • 5 HP main spindle motor
  • 36-1800, 12 steps spindle speeds
  • Hardened and ground gears and bedways
  • Full cast iron machine base and bedways with front pull-out chip tray
  • Foot brake and T-Slot compound; Dual Inch/metric dials with Quick-change Single view sleeve
  • Inch/metric ruler on tailstock quill

GENERAL SPECIFICATIONS

 

Machine Capacity

Swing over bed 16-3/16” (410 mm)
Swing over cross slide 10-3/8” (264 mm)
Swing over gap 23” (584 mm)
Width of bed 10-1/4” (260 mm)
Distance between centers 60” (1500 mm)
Cross slide travel 8-11/16” (220 mm)
Top slide travel 5-1/2” (140 mm)
Main Spindle Spindle speeds 12 steps
Spindle speed range 36-1800 rpm
Through hole diameter 2-1/16” (52.5 mm)
Spindle nose D1-6 camlock
Spindle bore taper MT #6
Threads Standard (Whit-worth) 45 (2-72) tpi
Metric pitch 39 (0.2-14) mm
Module (mm) 18 (0.3-3.5)
Diametrical 21 (8-44) DP
Feeds Longitudinal feeds 0.002”-0.067” in/rev
Cross feeds 0.001”-0.034” in/rev
Leadscrew Leadscrew diameter 4/5” (20 mm)
Thread pitch 4 tpi
Tailstock Quill travel 6” (155 mm)
Quill diameter 2” (52 mm)
Quill bore taper MT #4
Power Main motor 5 HP (3-phase, 220/440V)
Coolant pump motor 1/8 HP (3-phase)
Dimension Overall dimension 99” x 40” x 62” (LxWxH)
Packing dimension 105” x 44” x 66” (LxWxH)
Weight Net weight 3740 lbs
Gross weight 4180 lbs

 

STANDARD ACCESSORIES

 

  • 3-jaw chuck (9”)
  • Chuck cover
  • Steady rest
  • Follow rest
  • 4-position tool post
  • Coolant system
  • Full length splash guard
  • Halogen work light
  • Carriage stop
  • Thread chasing dial
  • Toolbox with standard tools

 

POWER REQUIREMENTS: 220/440 volts, 60 Hz, 3-phase, 20/10 Amp.

 

Total Package Price for (1) Kent USA RML-1660T   $15,950.00

Specifications and pricing subject to change or improved without prior notice.

 

OPTIONS AND ACCESSORIES

 

DRO system (Acu-Rite 200 Lathe)* $ 2,700.00

DRO Installation charge $ 400.00

Aloris CXA #3-Set (tool post plus 6 holders) $ 1,360.00

Micro carriage stop $ 350.00

5-C collet closer installed* $ 1,495.00

Royal Spindle Type Live center (M.T. #4) $ 718.00

BTC Zero-set 3-jaw chuck (8” D1-6) $ 1,280.00

4 Jaw independent chuck (10” D1-6) $ 795.00

Taper Turning Attachment installed* $ 1,450.00

Face Plate (12” D1-6) $ 680.00

Rustlick coolant (1 gal, mixes 1:30) $ 50.00

 

*Please note: Installed options may require a deposit; which is non-cancelable and non-refundable.

Additional information

Weight 4180 lbs
Dimensions 105 × 44 × 66 in

Reviews

There are no reviews yet.

Be the first to review “Kent USA RML-1660T Precision Lathe 60″ x 16″ 5Hp Spindle Hole 2-1/16” (52.5 mm)”

Your email address will not be published. Required fields are marked *