HSS-M2 Spiral Metric Tap Set Right Hand Thread Cutter Machine Taps For Stainless Steel M3 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20
M2(W6Mo5Cr4V2 High-speed steel) is the “standard” and most widely used industrial HSS. It has small and evenly distributed carbides giving high wear resistance, although its decarburization sensitivity is a little bit high.
After heat treatment, its hardness is the same as T1, but its bending Strength can reach 4700 MPa, and its toughness and thermo-plasticity are higher than T1 by 50%. It is usually used to manufacture a variety of tools, such as drill bits, taps and reamers.
High hardness(up to HRC.68), fast cutting, wear high temperature.
Spiral groove is conducive to remove crumbs, not easily broken tap.
Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
sticky materials processing.
For hard metal tapping,such as stainless steel, aluminum alloy, carbon steel, copper, wood, PVC, plastic and so on
M3: 3mm x 0.5mm
M4: 4mm x 0.7mm
M5: 5mm x 0.8mm
M6: 6mm x 1mm
M8: 8mm x 1.25mm
M10: 10mm x 1.25mm
M12: 12mm x 1.5mm
M14: 14mm x 2mm
M16: 16mm x 2mm
M18: 18mm x 2.5mm
M20: 20mm x 2.5mm