CNMG-432-DM TiCNAL COATED CARBIDE INSERT (6030-2432)

CNMG-432-DM TiCNAL COATED CARBIDE INSERT (6030-2432) (SKU: 6030-2432)

CNMG-432-DM TiCNAL Coated Carbide Insert

• Widely used chipbreaker is used for semi-finishing and finishing of steel and stainless steel
• I.C. is 1/2″
• L is 1/2″
• S is 3/16″
• d is 13/64″
• r is .0315″
• Grade XAB748 is made with thick TiCN and Al2O3 coating which has a high anti-plastic yield and cutting edge strength and is a preferred universal grade from steel finishing to roughing. It behaves steady in the wicked cutting condition and can realizes environmental dry-cutting. The cutting speed can increase more than 25% at the same cutting condition and the life will be improved more than 30% at the same cutting speed

Specifications

• CNMG-432-DM TiCNAL Coated Carbide Insert
• Widely used chipbreaker is used for semi-finishing and finishing of steel and stainless steel.
• I.C. is 1/2″.
• L is 1/2″.
• S is 3/16″.
• d is 13/64″.
• r is .0315″.
• Grade XAB748 is made with thick TiCN and Al2O3 coating which has a high anti-plastic yield and cutting edge strength and is a preferred universal grade from steel finishing to roughing. It behaves steady in the wicked cutting condition and can realizes environmental dry-cutting. The cutting speed can increase more than 25% at the same cutting condition and the life will be improved more than 30% at the same cutting speed.
• Weight: 0.02
• Dimensions: L 3, W 1, H 6

Benefits

• Industrial-grade tooling designed for dependable shop performance.
• Supports consistent results when applied with correct setup practices.
• A practical choice for U.S. machine shops and maintenance work.

Recommended use

• Confirm compatibility (size, interface, machine capacity) before ordering.
• Follow safe operating practices and use appropriate PPE.
• Optimize setup rigidity and process parameters for best results.

USA Warehouse Stock — Fast U.S. fulfillment.