WNMA-431 COATED CARBIDE DRILLING INSERT (6003-1431)

WNMA-431 COATED CARBIDE DRILLING INSERT (6003-1431) (SKU: 6003-1431)

WNMA-431 80 Degree Trigon Drilling Insert

• 0° relief angle
• I.C. is 1/2
• L is 0.343″
• S is 3/16
• d is 13/64″
• r is .0157″
• ISO insert number is WNMA080404
• Used for negative tool holders and boring bars
• Drilling insert
• No chipbreaker
• Grade XAC849 CVD all around coated and cemented carbide
• Optimized for steel milling and also a good solution for nodular cast iron
• This grade provides an economical solution for medium to long series production

Specifications

• WNMA-431 80 Degree Coated Carbide Drilling Insert
• 0° relief angle.
• I.C. is 1/2.
• L is 0.343″.
• S is 3/16.
• d is 13/64″.
• r is .0157″.
• ISO insert number is WNMA080404.
• Used for negative tool holders and boring bars.
• Drilling insert.
• No chipbreaker.
• Grade XAC849 CVD all around coated and cemented carbide.
• Optimized for steel milling and also a good solution for nodular cast iron.
• This grade provides an economical solution for medium to long series production.
• Weight: 0.02
• Dimensions: L 3, W 1, H 6

Benefits

• Industrial-grade tooling designed for dependable shop performance.
• Supports consistent results when applied with correct setup practices.
• A practical choice for U.S. machine shops and maintenance work.

Recommended use

• Confirm compatibility (size, interface, machine capacity) before ordering.
• Follow safe operating practices and use appropriate PPE.
• Optimize setup rigidity and process parameters for best results.

USA Warehouse Stock — Fast U.S. fulfillment.