2 X 2 X 7-3/4″ 8 FLUTE M42 COBALT FINE-PITCH ROUGHING END MILL (5823-2003)

2 X 2 X 7-3/4″ 8 FLUTE M42 COBALT FINE-PITCH ROUGHING END MILL (5823-2003) (SKU: 5823-2003)

2 X 2 X 4 X 7-3/4″ 8 Flute M42 Fine Pitch Cobalt Roughing End Mill

• Cutting diameter is 2″
• Shank diameter is 2″
• Cutting length is 4″
• Overall length is 7-3/4″
• Ground From Solid M42 Blank
• 8% cobalt
• Center cutting
• Low co-efficient friction
• The pressure of the cut is distributed over many teeth
• Recommended for high production milling in difficult-to-machine materials such as inconel, hasteloy, titanium alloys and other materials up to RC 40
• With a Weldon flat, a flat section on the tool shank, used to hold the tool in place by set screws within the body of the holder

Specifications

• 2 X 2 X 4 X 7-3/4″ 8 Flute M42 Fine Pitch Cobalt Roughing End Mill
• Cutting diameter is 2″.
• Shank diameter is 2″.
• Cutting length is 4″.
• Overall length is 7-3/4″.
• Ground From Solid M42 Blank.
• 8% cobalt.
• Center cutting.
• Low co-efficient friction.
• The pressure of the cut is distributed over many teeth.
• Recommended for high production milling in difficult-to-machine materials such as inconel, hasteloy, titanium alloys and other materials up to RC 40.
• With a Weldon flat, a flat section on the tool shank, used to hold the tool in place by set screws within the body of the holder.
• Weight: 5.8
• Dimensions: L 3, W 1, H 6

Benefits

• Industrial-grade tooling designed for dependable shop performance.
• Supports consistent results when applied with correct setup practices.
• A practical choice for U.S. machine shops and maintenance work.

Recommended use

• Confirm compatibility (size, interface, machine capacity) before ordering.
• Follow safe operating practices and use appropriate PPE.
• Optimize setup rigidity and process parameters for best results.

USA Warehouse Stock — Fast U.S. fulfillment.