WEISS WBL290F Metal Lathe 11-1/2″ x 29″ Benchtop machine
1. WEISS WBL290F bench lathe is a specially designed machine with an outstanding value and able to take on light duty jobs requiring a 11″ swing, 1-1/2″ (38mm) spindle bore and 29″ between centers.
2. The Primary purpose of WBL290F is to make concentric cuts in metal stock. With the lathe, round stock can be made perfectly concentric, threaded, drilled, knurled, bored, tapered, etc.
3. Real inch leadscrew and all feed screws for even, easy measurements. No need metric conversions
4. D1-4 camlock spindle make swapping chucks a lot easier, more precision
5. Large 1-1/2″ spindle bore
6. Power cross feed is available
7. Piston Type Quick Change Tool Post set included
8. Super smooth and quiet running machine
Apron
· WBL290F apron can provide power cross & longitudinal feed
· Feed rod with clutch system and micrometer carriage stop provide more pretection
· Feed rod resistance power can be adjusted by the clutch
Carriage Stop
Change Gears
· WBL290F change gears cover is equipped with protective QKS8 door swtich
· WBL290F change gears are all metal gears, can provides 21 kinds of inch threads and 12 kinds of metric threads cutting
· WBL290F gearbox provides both right and left hand threading
· Gearbox provides 3 kinds of feeding speeds
· Separate leadscrew and feed rod
Gearbox
Technical Details
Model No. WBL290F
· Distance between centers: 29″
· Swing over bed: 11-1/2″
· Swing over cross slide: 6-3/4″
· Bed width: 7″
· Spindle bore: 1-1/2″
· Spindle nose: D1-4
· Spindle taper: MT#5
· Spindle speeds: 50-1800 RPM (Variable)
· Range of cross feeds: 0.0015-0.0056″/rev.
· Range of longitudinal feeds: 0.0025-0.012″/rev.
· Inch thread range: (21) 8–56 TPI
· Metric thread range: (12) 0.4–3.mm
· Cross slide travel: 6-3/4″
· Compound rest travel: 3-3/4″
· Tailstock taper: MT#3
· Tailstock quill diameter: 1-1/4″
· Tailstock quill travel: 3-1/8″
· Motor type: Brushless, 2HP
· Power supply: 110V/1Ph/60Hz
· Rated current: 15A
· Packing size: 59″ W × 29-1/2″ D × 29″ H
· Approx. shipping weight: 590 lbs.
Additional Information
STANDARD EQUIPMENT:
· 6″ D type directly mounted 3-jaw chuck with two sets of jaws
· Steady rest
· Follow rest
· Face plate
· 250-111 Piston type quick change tool post with 4 holders
· Chuck guard
· Splash guard & oil tray
· Replacement fuse
· MT#3 living center
· MT#3 dead centers and MT3/MT5 center sleeve
· Tool box with service tools
