Sale!

Indexable Tunsgten Carbide Insert 10pc Pack TNMG160404 TF Grade 907

$14.86

Shipping Origin Warehouse China

Delivery Time 18 – 30 Days 

 

SKU: TNMG16 Category:

Indexable Tunsgten Carbide Insert 10pc Pack TNMG160404 TF IC907 908

Double-sided, triangular insert, positive rake angle that varies along the edge to negative in order to prevent chipping. Special design reduces cratering. Used for carbon and alloy steel, stainless steel and high temp. alloys.

L IC S RE ft
(min)
ft
(max)
ap
(min)
ap
(max)
16.50 9.52 4.76 0.40 0.12 0.30 1.00 3.00

A tough sub-micron substrate, PVD coated. Suitable for low-to-medium cutting speeds. Developed for machining of heat resistant alloys, austenitic stainless steel and hard steel.

ISO Range – P/M/K (P10-P30)(M05-M20)(K15-K30)
ISO Range – N/S/H (H05-H15)(S05-S20)(N05-N20)

 

Grade or Coating Type PVD
Coating Layers TiAlN+TiN
Cutting Speed Suggestion Manufacture for: TNMG 160404
ISO Material Material Designation Material Condition Hardness Cutting Speed Recommendations (Vc)
P 1 Non-alloy steel and cast steel, free cutting steel <0.25% C Annealed 125 HB 120-200 m/min
P 2 Non-alloy steel and cast steel, free cutting steel >=0.25% C Annealed 190 HB 100-170 m/min
P 3 Non-alloy steel and cast steel, free cutting steel <0.55% C Quenched and tempered 250 HB 80-150 m/min
P 4 Non-alloy steel and cast steel, free cutting steel >=0.55% C Annealed 220 HB 90-160 m/min
P 5 Non-alloy steel and cast steel, free cutting steel >=0.55% C Quenched and tempered. 300 HB 80-130 m/min
P 6 Low alloy and cast steel (less than 5% of alloying elements) Annealed 200 HB 80-150 m/min
P 7 Low alloy and cast steel (less than 5% of alloying elements) Quenched and tempered 275 HB 70-130 m/min
P 8 Low alloy and cast steel (less than 5% of alloying elements) Quenched and tempered 300 HB 60-120 m/min
P 9 Low alloy and cast steel (less than 5% of alloying elements) Quenched and tempered 350 HB 50-100 m/min
P 10 High alloyed steel, cast steel and tool steel Annealed 200 HB 80-130 m/min
P 11 High alloyed steel, cast steel and tool steel Quenched and tempered 325 HB 50-100 m/min
P 12 Stainless steel and cast steel Ferritic/martensitic 200 HB 170-265 m/min
P 13 Stainless steel and cast steel Martensitic 240 HB 140-245 m/min
M 14 Stainless steel and cast steel Austenitic 180 HB 100-280 m/min
K 15 Grey cast iron (GG) Pearlitic/ferritic 180 HB 30-140 m/min
K 16 Grey cast iron (GG) Pearlitic/martensitic 260 HB 30-140 m/min
K 17 Nodular cast iron (GGG) Ferritic 160 HB 30-140 m/min
K 18 Nodular cast iron (GGG) Pearlitic 250 HB 30-140 m/min
K 19 Malleable cast iron Ferritic 130 HB 30-140 m/min
K 20 Malleable cast iron Pearlitic 230 HB 30-140 m/min
S 31 High temp. alloys Fe based Annealed 200 HB 50-80 m/min
S 32 High temp. alloys Fe based Hardened 280 HB 40-65 m/min
S 33 High temp. alloys Ni or Co based Annealed 250 HB 45-60 m/min
S 34 High temp. alloys. Ni or Co based Cured 350 HB 35-45 m/min
S 35 High temp. alloys. Ni or Co based Cast 320 HB 30-50 m/min
S 36 Titanium (pure) Pure 110 HB 100-180 m/min
S 37 Titanium alloys Alpha+beta alloys 310 HB 50-55 m/min
H 38 Hardened steel Hardened 55 HRC 20-90 m/min
H 39 Hardened steel Hardened
Weight 6 lbs
Angle

TNMG160404 TF IC907, TNMG160404 TF IC908, TNMG160408 TF IC907, TNMG160408 TF IC908

Shank Diameter

10PCS

Shopping Cart